1
/
of
2
Tulsi Resin 3:1 - Art Epoxy (300 Gram)
Tulsi Resin 3:1 - Art Epoxy (300 Gram)
Tulsi Resin's 3:1 – Art Epoxy for pouring your creativity.
Minimum Order Pack - 10 pcs
Price:- For 1 set excluding GST
| Specification | Value |
|---|---|
| Mixing Ratio | R:H - 3:1 |
| Pot Life At 25° C | 90 - 120 Min |
| Touch Dry | 8 - 12 hours |
| Fully Cured | 24 - 36 Hours |
| Measurement | By Weighing Scale |
| Viscosity At 25° C | 500 - 800 |
| Hardness | 75 Shore D |
| Properties | Description |
|---|---|
| Best For | Silicon Mould Casting, Deep Casting & Top Coat |
|
Transparency |
Crystal Clear with Glass like transparency. |
| Bubble-Free | Bubble get automatically busted after mixing |
| Wetting property | Uniformly spread to the surface, resulting in a smooth and even layer without any gaps, shrinkage or bubbles |
| Consistency | Thin consistency for easy mixing that also improve Mould's life. |
| Features | Non-yellowing, Moisture Free, Hard Cure & Conforms to ASTM Rules |
| For Deep Pour | Description |
|---|---|
| Layer | 2nd layer pouring after 8-10 hrs. |
| Casting Thickness | Capable of casting up to 8-10 mm in a single layer. |
| Deep Pour | Capable of 2-3 inch (60 MM) deep pour in 6-8 layers. |
| Precautions | Guidelines |
|---|---|
| Application | Exercise caution in high humidity, low daylight, and low temperature conditions. - Maintain ambient temperature (20-35°C) and humidity below 65%. - Use vacuum to achieve air-free components in filled molds. |
| Mixing | Thoroughly mix manually or mechanically to eliminate haziness or streaks.- Mix small quantities to test your ratio |
| Safety | Wear personal protective equipment (PPE). - Avoid eye and skin contact; wash off with warm water if necessary. - Prevent inhalation of vapors, mist, or gas. Keep hardener bottle closed due to fuming tendency. |
Login on the website to see prices.
Regular price
Rs. 215.00
Regular price
Sale price
Rs. 215.00
Unit price
/
per
Couldn't load pickup availability
